Publicité
Les langues disponibles
Les langues disponibles
for electrical check to determine if the
charger is in good working order.
■
Do not disassemble charger. Take it
to an authorised serviceman when
service or repair is required. Incorrect
reassembly may result in a risk of
electric shock or fire.
■
Unplug charger from outlet before
attempting
any
cleaning to reduce the risk of electric
shock.
■
Disconnect charger from the power
supply when not in use. This will
reduce the risk of electric shock or
damage to the charger if metal items
should fall into the opening. It also will
help prevent damage to the charger
during a power surge.
■
Risk of electric shock. Do not
touch uninsulated portion of output
connector or uninsulated battery
terminal.
■
Do not recharge primary cells (non-
rechargeable).
■
The
recommended
temperature range for the charging
system during charging is between
10°C and 38°C.
BATTERY SAFETY WARNINGS
Li-ion
■
Do not dispose of used battery packs
in the household refuse or by burning
them. To ensure proper disposal of
waste battery packs and protect the
environment, hand over old battery
packs to your RYOBI distributor.
■
Segregate electronic waste properly
by removing integrated battery packs
from the main unit before disposal.
Hand
them
over
collection points.
maintenance
or
ambient
to
applicable
■
To remove the integrated battery
pack: Separate the housing shells
from one another by removing the
screws. Disconnect the battery pack
from the circuit and remove.
■
NOTE: When opened, the product
is no longer reusable or serviceable
and should be disposed of properly.
■
Before removing the battery pack
from the power tool, switch on the
product until the battery pack is fully
discharged.
■
Ensure that the battery pack to be
disposed of cannot come in contact
with batteries, other battery packs,
or conductive materials by protecting
exposed connectors with insulating,
non-conductive caps or tape.
■
Never charge a damaged battery
pack.
■
Ambient
temperature
battery during use is between 0°C
and 40°C.
■
Ambient
temperature
battery storage is between 0°C and
20°C.
ADDITIONAL BATTERY SAFETY
WARNING
To reduce the risk of fi re, personal
injury, and product damage due to a
short circuit, never immerse your tool,
battery pack or charger in fl uid or allow
a fl uid to fl ow inside them. Corrosive or
conductive fl uids, such as seawater,
certain
industrial
bleach or bleach-containing products,
etc., can cause a short circuit.
RESIDUAL RISKS
Even when the product is used as
prescribed, it is still impossible to
completely eliminate certain residual
risk factors. The following hazards may
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
range
for
SV
FI
NO
range
for
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
chemicals,
and
2
Publicité
