Publicité
Les langues disponibles
Les langues disponibles
B
CAUTION
It must be possible to disconnect the appliance from the
electricity supply; The plug must be easily accessible after
installation
Electrical connection
Before connecting the appliance, make sure that the voltage and frequency indicated on the
nameplate correspond to your domestic power supply. This appliance must be earthed. There
is a pin in the power supply plug for this purpose. If the household socket is not earthed, you
should contact a qualified electrician to connect the appliance to a separate earthing point in
line with the statutory requirements for power supplies. The manufacturer accepts no liability
if the above-mentioned safety measures are not respected. The appliance is compliant with
European directives.
Initial use
Cleaning the inside
Before using the appliance for the first time, wash the interior and all internal accessories with
lukewarm water and a neutral soap to remove the characteristic odour of new products. Dry
thoroughly.
WARNING
Do not use abrasive powders or detergents as they will
damage the finish.
Control panel
Buttons
•
B1 – Press this button to adjust the refrigeration compartment cycle setting from1, 2, 3, 4
to 5.
•
B2 – Press this button to select either Smart or Super mode and user settings.
Lights
•
L1 – Indicates the refrigeration compartment setting.
L2 – comes on after selecting the Smart mode .
•
L3 – comes on after selecting the Super mode.
•
Using the appliance
10
EN
Publicité
