Publicité
Les langues disponibles
Les langues disponibles
1. If after selecting the program, no button on the keyboard is activated for 5 seconds, the selection is confirmed
automatically.
2. If one daily program (P1 to P9) comfort and ECO temperature modified, all daily programs and pilot wire
mode's comfort and ECO temperature will be modified.
Personalisation of the Daily programs
Press
, then choose the program you want to personalise from
1- Press
for 3 seconds, the icon PROG appears on the display.
2- The first segment
Example program P1:
Use
to choose how to allocate this first hour.
(
for comfort
,
3- Use
or
to go to the next or previous hour of the program.
Repeat 2 until each segment of the program is customised.
4- Press
for 3 seconds to confirm your program. The icon PROG disappears on the screen.
NOTE: The new program replaces the old program in the device memory.
If your personal settings do not satisfy you, you can return to the factory preset. Turn off the device using the
switch on the back of the device. Then press
The customization of the daily programs must be done before the weekly programming.
Weekly programming
1- Press
once.
2- Choose the daily program
3- Press
once to confirm your choice.
4- Press
for 3 seconds, the icon PROG appears on the display.
5- The number 1, representing MONDAY and the program corresponding P1
will flash.
6- Assign by using
number 2 will blink- representing Tuesday. Repeat until you have assigned a program for each day of the week
(1 - to 7 Monday-Sunday).
7- After assigning the program to 7-Sunday, confirm your selection with
the display.
8- The heater then operates in accordance with the new weekly program that you have just created
OPEN WINDOW FUNCTION
Your heater has an open window function. If you open a window widely in the space where the heater is located
and the temperature drop more than 2ºC in 5 minutes, a sensor will detect the sharp drop in temperature. The
of 00:00 flashes.
for economic
and
by using
or
a program (from P1 to P9) for Monday. Confirm your selection with
EN
for frost mode
).
for 7 seconds to reset the device.
or
.
18
to
by using
or
. The icon PROG disappears on
.
. The
Publicité
