Powerboost; Countup Timer - AEG IKE41600KB Notice D'utilisation

within this time, the heat setting reactivates.
Otherwise the cooking zone deactivates.

5.5 PowerBoost

This function activates more power for the
appropriate induction cooking zone,
depending on the cookware size. The
function can be activated only for a limited
period of time.
Touch to activate the function for the
cooking zone.
The symbol turns red.
The function deactivates automatically.
For maximum duration values,
refer to "Technical data".
5.6 PowerBoost with a double ring
cooking zone
The function is activated for the inner ring
when the hob detects a pot with a diameter
smaller than the inner ring. The function is
activated for the outer ring when the hob
detects a pot with a diameter bigger than the
inner ring.
5.7 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / As long as the
indicator is on, there is a risk of
burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
The indicators /
cooking zone is hot. They show the level of
the residual heat for the cooking zones you
are currently using.
The indicator may also appear:
• for the neighbouring cooking zones even
if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
30 ENGLISH
/ appear when a
The indicator disappears when the cooking
zone has cooled down.
5.8 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a single
cooking session.
First set the heat setting, then set the
function.
1. Touch to activate the function or
change the time.
The timer digits
and come on the display.
and turns white.
If the timer is not set, all indicators disappear
after 4 seconds.
2. Touch or
minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
and disappear.
When the time comes to an end, a signal
sounds and flashes. To stop the signal,
touch .
To deactivate the function: touch
indicators and
to set on the display. Alternatively, set
the heat level to 0. As a result, a signal
sounds and the timer is cancelled.

CountUp Timer

You can use this function to monitor how
long a cooking zone operates.
Touch twice to activate the function.
The indicator turns red, the timer starts to
count up automatically.
To deactivate the function: touch
the indicators light up, touch
and the indicators
turns red,
to set the time (00 - 99
,
stays red.
. The
come on. Use or
. When
.
,