Battery Replacement - TFA 60.32511 Mode D'emploi

TFA_No. 60.2511_Anleitung_08_20
Radio controlled alarm clock
9. RESET function
• If the unit does not work properly use a pin to press the RESET button.
10. Care and maintenance
• Clean your instrument with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries if you do not use the product for a long period of time.
• Keep the instrument in a dry place.

10.1 Battery replacement

• Replace the batteries when the display becomes weak.
• Open the battery compartment and insert the two new batteries 1,5 V AAA. Ensure that the battery
polarity is correct
• Close the battery compartment again.
34
05.08.2020 11:38 Uhr Seite 18
Radio controlled alarm clock
11. Troubleshooting
Problem Solution
➜ Ensure that the batteries polarity are correct
No display
➜ Change the batteries
➜ Press and hold ▼ and ▲ button at the same time and start the recep-
No DCF reception
tion manually
➜ Choose another place for your product
➜ Wait for attempted reception during the night
➜ Check if there is any source of interference.
➜ Restart the device according to the manual
➜ Manual setting of the clock
35