ProMed 1030 Instructions D'utilisation page 16

Les langues disponibles

NFORMATION ON THE UNIT

• Information about suitable disinfectants and products can be obtained from Promed.

For disinfection of instruments and grinding heads:

Promed Pure ID (Product No. 330810)

For disinfection of surfaces and devices:

Promed Pure FD (Product No. 330815)

For disinfection and cleaning of instruments and grinding heads:

Promed UC-50 (Product No. 330210)

• If needed, the power adapter (Product No. 290426) and the handpiece (Product No. 201004)

can be purchased from Promed separately.

Scope of delivery:

1x Device 1030 (item 201001)

1x Handpiece MR10 (item 201004)

1x Power adapter (item 290426)

1x Instructions

Optional accessories:

A foot pedal (Product No. 290004) with an ON/OFF function is available as an accessory.

PERATING THE UNIT

Before you switch the unit on, you must set the rotating speed (rotary knob (D))

to zero.

A. Insert the power adapter (A) into the power socket and the power adapter plug (B), on the

back of the device, into the provided power adapter socket (C).

B. Insert the plug of the handpiece into the socket (I) on the right side of the device.

C. Select a suitable grinding head. Insert the abrasive wheel in the front on the hand piece

into the abrasive wheel mount (K) and lock the collet.Never use force to remove or insert

a grinding head! Grinding heads with a shaft diameter of 2.332 mm to 2.350 mm (0.091

to 0.093 inches) ﬁt exactly into the grinding head holder without you having to use excessive

force. To remove a grinding head, switch off the device with the rotation switch (D) (middle

position), making sure that the rotation switch (D) clearly locks into place. Now remove the

abrasive wheel after opening the collet.

D. Control of the rotation direction and speed:

1. Selection of the rotation direction:

You make this selection by turning the rotation switch (D) to the left or right.

Counterclockwise: The abrasive wheel turns to the left.

Clockwise: The abrasive wheel turns to the right.

2. Choice of rotational speed:

The speed is regulated by turning the rotation switch (D) to the left or to the right. The more you

turn, the higher the rotationspeed.

/ S

COPE OF DELIVERY

Kaitstud / Secured by https://mereneid.eu/

ACCESSORIES