Getting Started - Linea 2000 DOMO B3975 Mode D'emploi

B3975
"Light lamp" button
To turn the interior light on and off.

GETTING STARTED

When plugging in the appliance a "biep" signal isheard and "1 3:00" is shown on
the display. The colon between 3 and 10 won't blink. This is the standard setting"1"
is stating the selected program., in this case the program 1 "basic". 3:00 is stating the
working time of the program.
The display also shows an arrow pointing at "1000 g", to indicate the size of bread
selected.
A second arrow points to "medium", to indicated the selected crust colour. These are
all standard selections.
PROGRAMS
Program 1 : basic : the most frequently used program for baking white bread.
Program 2 : whole wheat : this program is best used for making heavier breads, such
as multi grain or whole wheat. These breads will be smaller than white bread, because
the fl our is heavier.
Program 3 : french : the kneeding and rising time for this program is longer than
with the program basic.
Program 4 : quick : this program can be used for baking a bread within a limited
amount of time.
Program 5: sweet : this program is suited for making sweet breads such as raison
bread.
Program 6 : Cake : with this program you can bake a bread, made of baking powder.
Bread baked with this program will be smaller and more solid. The timer can't be
used with this program, because baking powder will work instantly. If you want to
make cake with this program, we recommend to add the ingredients to the bake pan.
Select the program and before pressing the start button, mix the ingredients with a
wooden spoon. This will enhance the kneeding proces.
Program 7 : jam : for making delicious fresh jam. Attention ! Make sure to remove
the pips from the fruit, before adding them to the bake pan. Sharp pips can damage
the anti-adhesive layer.
Program 8 : dough : with this program you can only make dough.
Program 9 : ultra fast : To make a fresh bread of 700g in a bit more than 1 hour.
Program 10 : bake : this program can be used to bake already prepared dough. By
using the time knobs you can set the time from 5 tot 60 min. You can also reheat
already baked bread.
Programm 11 : rice pudding : This programm is meant for making rice pudding,
according to the following recipe : 1 1/2 cup of dessert rice. First boil the rice. When
the rice is ready add it in the bread pan allong with 1 3/4 cup of milk and 6 or 7 table
spoons of sugar. According to your own taste you can also add saffran. Put the baking
pan back in the bread maker and select the programm. Press start.
50