Linea 2000 DOMO B3975 Mode D'emploi page 49

B3975
Tip : if you use a recipe for the fi rst time, we recommend to use the selection medium.
"loaf size" button
This button is used to select the size of bread you want to back "small or "larger".
"Larger" is selected to bake a large bread up to 1350g, "small" is used for baking two
or one small bread of 450g.
Tip : the total amount of ingredients mentioned on the recipe is the weight of your
bread.
"start" and "stop" button
With this button the program can be started or stopped.
Tip : when selected the wrong program, you can stop the bread maker by pressing the
"stop" button during a few seconds. Afterwards you can reset the appliance with the
correct program.
Start : to start the program, press the button once a short biep will be heard. The ":"
between the time will start blinking. The appliance will countdown the time and fi nish
the program.
Stop : to end the program, press the button a few seconds until a biep is heard, to
confi rm the program has stopped.
On/off
How can you check if the machine is working or the program is runing ?
If the ":" is blinking the program is working.
If the ":" is lighted constantly the program has stopped.
"time" button
For setting the current time as well as for programming the timer.
"cycle" button
For setting the different cycles in the "home made" programm. This button can also be
used for locking the control panel.
Lock : fi rst press the "cycle" button immediatly followed by the "color" button. On the
display will appear a key symbol.
Unlock : press the "cycle" button followed by the "color" button again.
NOTE : when you start the bread maker by pressing the "start" button, the control
panel will be locked automatically after 5 min.
"Pause" button
For interrupting a program. When pressing the "pause" button the program will be
interrupted but not stopped. The remaining time will start to blink. When pressing the
"pause" button again, the program will fi nish the remaining time.
The "pause" button is also used for setting hours and min. when setting the time.
49