SCS Sentinel AirVisio 200 Notice D'utilisation Et D'installation page 24

C4- Test your product
1.
ONCE THE DOOR ENTRY SYSTEM
IS POWERED, TEST ITS OPERATING.
Place the door station and monitor
close to each other.
2.
TEST THE PRODUCT
IN ITS ENVIRONMENT
Be careful the distance of 200m is
called «free field», that is to say without
Barbed wire, entry door, walls, pillar,
trees and nearby electromagnetic
activity (power lines, telephony) can
seriously weaken the signal.
24 EN
obstacles.
Press the door station, if
the monitor rings, your
device is in service!
You can proceed to
check 2.
If your device doesn't ring,
pair the monitor with the
door station on page 32.
If the monitor sounds in
the tested environment,
proceed with the
installation.
If it doesn't sound, change
the location of the door
station and/or monitor
until you find the ideal
configuration.