EcoNet RETST800SYS Guide De L'utilisateur page 7

System Modes
The EcoNet Smart Thermostat will call for heat or cool based on the current settings and temperature. Cooling
and heating equipment may have a delay period before operation is enabled. The delay can be up to 5 minutes
(if the mode was changed right after equipment turns off). Status screen will show a "Hold-Off Timer" for
Equipment State.
80 80 80
Resume Schedule Group 1
75 71 75 36
Home Home Away
Refrigeration
Cooling to
62 85
70 65 34
Select a Mode
80 80
Resume Schedule Group 1
71 75 36
Auto Heat Cool
Away Home
OFF
Fan
Refrigeration
Cooling to
70 34 65
BACK
Select a Mode
80 80
Resume Schedule Group 1
71 75 36
Auto Heat Cool
Home Away
OFF
Fan
Refrigeration Cooling to
70 65 34
BACK
80 80 80
Resume Schedule Group 1
75 71 75 36
Home Home Away
Refrigeration Cooling to
62 85
34 65 70
Select a Mode
80 80
Resume Schedule Group 1
71 75 36
Auto Heat Cool
Home Away
OFF
Fan
Refrigeration
Cooling to
34 65 70
BACK
80 80 80
Resume Schedule Group 1
75 71 75 36
Home Home Away
Refrigeration Cooling to
34 62 70 65
> Return to Table of Contents
Select the mode icon in the bottom right corner of the home screen to quickly
! !
change the operating mode.
44% 44% 44%
UNITS
Select from Auto, Heat, Cool, E-Heat, Fan and Off
!
E
E Heat
44% 44%
UNITS
Auto – Activates the heating or cooling system as required to keep your home
!
within the configured range of set point temperatures. Select the desired
E
set point, and then use the large adjustment buttons to set the desired
E Heat
temperature. To adjust your cooling set point, tap the set point on the right -
44% 44%
it will turn blue, then adjust using the plus and minus buttons. The current
temperature in the center of the screen will temporarily be replaced by the
UNITS
set point in large font during temperature adjustments.
Note: The default deadband or separation between the heating and cooling set points is 2 degrees.
! !
44% 44% 44%
UNITS
Heat – Turns on heating when the current temperature drops below your set
!
point temperature. When there is an active call for heating, the words 'Heating
E
To' will appear above the heating set point.
E Heat
44% 44%
UNITS
(Heating set point screen)
! !
44% 44% 44%
UNITS
EcoNet Smart Thermostat User Guide
®
7