Publicité
Les langues disponibles
Les langues disponibles
Settings (con't)
Humidification
80
80
Enable Humidification?
No
Resume Schedule
Group 1
71
75
36
Humidify Set Point
30 %
Humidify During...
Heat
Smart Control
Off
Home
Away
Humidity With Fan
Off
Refrigeration
Cooling to
65
70
34
BACK
How to test a humidifier
Adjust the humidify set point up to 'TEST', select Humidify during "Heat/Fan", then turn on a continuous fan
speed on the Fan screen under Settings. This should force the humidifier to run. This setting will last for 30
minutes, where the maximum setting will return to 4% below the dehumidification set point.
Settings
80
80
Resume Schedule
Group 1
71
75
36
Basic
Time
Home
Away
Away
Vacation
Refrigeration
Cooling to
34
70
65
BACK
Settings
80
80
Resume Schedule
Group 1
75
71
36
Basic
Time
Home
Away
Away
Vacation
Refrigeration
Cooling to
70
65
34
BACK
Vacation Settings
80
80
65º
85º
Auto
Resume Schedule
Group 1
75
71
36
Start:
02:00 pm
Jan.
29
Home
Away
End:
02:30 pm
Feb.
10
Vacation
Water
Yes
Refrigeration
Cooling to
Heater
70
65
34
BACK
> Return to Table of Contents
Smart Control – Smart Control is used to reduce or prevent water
!
condensation on the inside of windows while humidifying in the winter season.
The control monitors indoor and outdoor temperatures and reduces the
humidification percentage according to the Smart Control level chosen by the
44%
44%
user. Start out with the Low setting. If objectionable condensation occurs on
windows, choose the Medium or High setting.
UNITS
Humidify With Fan – If there is a call to humidify and the fan and heating/
cooling are off, the fan will be forced on to humidify. Select the desired fan
speed from Low to High.
Note: Humidification is only available if a humidifier is installed.
Away Settings (Menu > Settings > Away)
!
Your system will follow the customized heating, cooling and fan settings when
Humidity
you place your system into 'Away' mode. The system can be placed into
44%
44%
Away by selecting the Home icon (closed door) on the home screen. Once
Fan
the system is placed into Away mode it will remain until canceled. Simply tap
Installer
UNITS
the Away icon (open door) to exit Away mode. The system will resume the
schedule or return to the previous settings if a schedule is not being followed.
You can also exit Away by increasing or decreasing the temperature.
Note: If your system is in Cool or Heat when placed into Away mode your system will only manage to
the respective Away set point.
Vacation (Menu > Settings > Vacation)
!
The Vacation screen allows you to preschedule desired heating, cooling and
Humidity
fan settings when you are going to be away for an extended time.
44%
44%
Fan
To schedule your vacation, select the time, month, day and year and then use
the up and down arrows to set desired start and end dates.
Installer
UNITS
Note: You will need to set the vacation end time and date before you can set its start.
Select each set point and fan speed and then use the up down arrows to set
!
to your desired vacation conditions. We recommend setting the fan speed
to Auto.
2018
2018
44%
44%
Yes
UNITS
EcoNet
Smart Thermostat User Guide
®
15
Publicité
