Publicité
Les langues disponibles
Les langues disponibles
Menu Options
80
80
80
Resume Schedule
Group 1
75
71
75
36
Home
Home
Away
Refrigeration
Cooling to
62 85
70
34
65
Settings
Menu
80
80
Resume Schedule
Group 1
71
75
36
Settings
Schedule
Status
Home
Away
Water Heating
Refrigeration
Cooling to
70
65
34
BACK
Settings
80
80
Resume Schedule
Group 1
71
75
36
Basic
Time
Home
Away
Away
Vacation
Refrigeration
Cooling to
34
70
65
BACK
Basic Settings
80
80
Follow Schedule?
Yes
Resume Schedule
Group 1
75
71
36
Alarm Beep Enable?
No
Screen Lock?
No
Temperature Display
Fahrenheit
Home
Away
Schedule Override Time
2 hours
Refrigeration
Cooling to
Auto-Changeover Time
5 min.
34
65
70
BACK
> Return to Table of Contents
Tap the Menu icon in the bottom left corner of the home screen to easily
!
!
view and configure your personal and system settings.
44%
44%
44%
UNITS
Settings (Menu > Settings)
!
Adjust system-level settings and preferences, from customizing your away
temperatures to scheduling a vacation. Tap the Menu icon from the home
Service
44%
44%
screen and then tap Settings.
UNITS
Basic (Menu > Settings > Basic)
!
Adjust thermostat or basic equipment settings and preferences.
Humidity
44%
44%
Fan
Installer
UNITS
Follow Schedule – If a programmed schedule is desired, set to "Yes."
!
Alarm Beep Enable – Sounds an audible alarm tone shall a critical alarm
condition occur.
44%
44%
Screen Lock– To lock the main screen from any changes, enable the lock. To
unlock, enter the Basic settings menu again and set Screen Lock to "No." This
MORE
UNITS
locking function prevents any changes except changes made from within the
Basic Settings.
Temperature Display – Change your indoor temperature and set points
between Fahrenheit and Celsius.
Schedule Override Time – While a schedule is running, if a set temperature
change occurs on the main screen, the change will be in effect for this amount
of time. The default is 2 hours. You can customize between a minimum
override of 1 hour and a maximum of 8 hours.
Auto Changeover Time – When the system is in Auto mode, this is the
amount of time demand must exist in the opposite mode (cooling or heating)
in order for the system to switch to that mode. The default is 5 minutes. The
setting is configurable between 5 and 60 minutes.
EcoNet
Smart Thermostat User Guide
®
12
Publicité
