Jenn-Air JMW2430LM Manuel D'utilisation page 16

Cutout Height is Between 50
129.9 cm) or For Flush Installation
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Install a rear foot on the left rear spacer using a #8-18 x 3/8"
(9.5 mm) screw.
NOTE: Position the foot so the long side of the foot is facing
toward the top of the oven.
A.
Spacer
B.
Rear foot
C.
#8-18 x 3/8" (9.5 mm) screw
3. In the same manner, install a rear foot on the right rear of the
oven.
16
/ " and 51 / " (128.2 cm and
1 1
2 8
4. Install a front foot on the left front spacer using a #8-18 x 3/8"
(9.5 mm) screw.
NOTE: Position the foot so the long side of the foot is facing
toward the inside of the oven.
A.
Front Foot
B.
#8-18 x 3/8" (9.5 mm) screw
C.
Spacer
5. In the same manner, install a front foot on the right front of the
oven.
6. Using 2 or more people, place the oven in its upright position.
7. Go to the "Make Electrical Connection" section.