Publicité
Les langues disponibles
Les langues disponibles
EN
Description of main operation
Risk of injury: Always secure the workpiece in such a manner that it cannot move while being machined.
Observe the following instructions:
- The sanding capacity and quality are mainly dependent on the selection of the correct abrasive.
- Hold the machine with two hands, one on the motor housing and one on the gear head.
Sanding applications
● 9000-10000/min
Sanding with max. abrasion
Sanding off old paint
Sanding of wood and veneered surface prior to paintwork
Intermediate sanding of paintwork on surfaces
● 8000-9000/min
Sanding thinly applied undercoat
Sanding wood with sanding cloth
Edge breaking on wooden parts
Smoothing primed wooden surfaces
● 7000-8000/min
Sanding solid wood and veneered edges
Sanding rebate of windows and doors
Intermediate sanding of paintwork at edges
Light sanding of natural wood windows using sanding cloth
Smoothing wooden surfaces using sanding cloth before staining
Rubbing or removing excess limestone residue using sanding cloth
● 6000-7000/min
Intermediate sanding of paintwork on stained surfaces
Cleaning natural wood window rebate using sanding cloth
● 4000-6000/min
Sanding stained edges
Sanding of thermoplastics
CAUTION! This product has been marked with a symbol relating to removing electric and electronic waste. This means that this product shall not be
discarded with household waste but that it shall be returned to a collection system which conforms to the European WEEE Directive. Contact your
local authorities or ask for advice on recycling. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and
electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances.
7
WWW.NIKOLAOUTOOLS.GR
Publicité
