Publicité
Les langues disponibles
Les langues disponibles
•
If the capillary tube is damaged by the user the guarantee will be
void.
Mains connection
•
This appliance should be connected to AC 220-240V 50Hz supply
scoket. The socket must be fitted properly, and must be supplied
with an earthing conduit and a 10A fuse.
•
It is a legal requirement that the appliance is properly earthed. The
manufacturer will not be held liable for any damage or injury which
may result from the failure to fulfil this requirement.
•
Do not use adapters, multiple sockets and two-wire extension leads.
If it is necessary to use the extension lead, it must be equipped with
a protection ring and a single socket and must have a VDE/GS safety
certificate.
•
If an extension lead is used (with a protection ring and safety
certificate), its socket must be located at a safe distance, away from
the sinks, and must not be in a place where in could be flooded by
water or waste water.
•
See the type plate at the lower part of the internal wall of the appli
ance for detailed specifications**.
Disconnecting the mains
Make sure the appliance can be easily disconnected from the mains,
either by pulling the plug out of the mains socket, or by switching the
two-pole switch of.
- 36 -
EN
Publicité
