PNI PoC 1800 Mode D'emploi page 6

long press the OK key to enter the list of group members. Under the list of group
members, you
can select the person you want to call.
Press the PTT button to turn on dynamic PTT. Next, press the PTT button to talk and
release PTT to listen. Press the OK key to close the conversation. The dynamic PTT
function will automatically turn off after 15 seconds if there is no conversation.
Group change
With the screen in PTT mode, press DOWN on the navigation pad to enter the group
list. After choosing the desired group, press the OK key to change the group.
Shortcut: group change
Briefly press the side button 2 to switch to the desired group and you will receive a
voice announcement with the name of the group.
At the same time, the group becomes a Current group - Press PTT to start talking.
Emergency Alarm (SOS)
Note: This function would be invalid if the Virtual Trunk Dispatch Console has not
registered an alarm number to the radio ID.
Press and hold the side button 1 for 3 seconds to activate the SOS function.
Enter the APK settings
With the screen in PTT mode, press UP on the navigation pad. It will show the SETTINGS
menu which can be used to check your personal information OR to change voice call
settings/sleep mode/incoming PTT call options/Dynamic PTT options/ PTT to enable
screen settings.
ROM Settings
Short press the MENU button to enter the ROM setup menu. You can set
network, WLAN, BT, location, startup sound, phone status, etc.
Establish a wireless connection
Set up the WLAN connection
WLAN connection
1. In "Settings" menu, press UP/DOWN key to choose WLAN, press OK to confirm and
enter WLAN mode, now you can configure WLAN connection.
2. Under WLAN, press the OK button to turn WLAN on or off. And you can see
"Connected WLANs/Available WLANs/Saved WLANs".
3. Press the UP/DOWN button to choose the desired WLAN, enter the correct password
and press the OK button to confirm and connect.Configurati conexiunea
English 6 User manual