Parkside PAS002 Traduction Des Instructions D'origine page 9

Table of Contents
Introduction................................ 9
Proper use..............................................9
Technical data.................................... 10
Safety information................... 10
Markings on the safety goggles........10
Safety information for goggles.......... 10
Transport.................................. 11
Cleaning and disinfection..........11
Maintenance and storage......... 11
Disposal/environmental
protection................................. 11
Spare parts and accessories......11
Service..................................... 11
Guarantee...........................................11
Repair service..................................... 12
Service Centre.................................... 13
Importer...............................................13
Translation of the original EU
declaration of conformity......... 13
Introduction
Congratulations on purchasing your new
product .
You have chosen a high-quality device.
This device was quality-tested and subjec-
ted to a final inspection during production,
therefore ensuring proper functioning of
your device.
The instruction manual forms part of this
device. It contains important information
on safety, use and disposal. Read the
instruction manual carefully. Familiarise
yourself with the controls and how to use
the device correctly. Use the device only
as described and for the stated fields of
application. Store the instruction manual
carefully and ensure that all documents
are handed over in the event that the
device is passed on to another user.
Proper use
Any other use that is not expressly permit-
ted in this instruction manual may pose
a serious hazard to the user and result in
damage to the device. The operator or
user of the machine is responsible for any
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
This device is only intended for the follow-
ing use:
• Eye protection when cutting wood in a
domestic environment.
Optical class:
1 Safety goggles are suitable for work
that demands very high visual per-
formance (maximum dioptre deviation
+/- 0.06)
The optical class marking on your safety
goggles defines how long the safety
goggles can be used for and specifies the
maximum dioptre deviation. These safety
goggles belong to optical class 1.
They are therefore suitable for long-term
use.
Protection class:
F Low energy impact (6 mm ball at 45
m/s)
The mechanical strength of these safety
goggles has been verified by means of
a bullet test with a 6 mm steel ball at 45
m/s and awarded protection class "F" for
low energy impacts.
GB MT
9