symbol allows use with high-energy
particles at extremely high temperat-
ures. If the T designation is missing,
room temperature is assumed.
Transport
The safety goggles should be transported
in a suitable protective cover (e.g. case) to
avoid scratches and damage.
Cleaning and
disinfection
• The safety goggles must be cleaned
with a mild soap and lukewarm water.
• Dry the safety goggles with a clean
cotton cloth.
• Do not leave to dry near heat sources.
• Disinfect the safety goggles regularly,
but do not use solvents.
Spare parts and accessories
You can get spare parts and accessories from www.grizzlytools.shop. If
you have any problems with your order, contact us via our online shop. If you have any
other questions, contact the Service Centre, p. 13
Service
Guarantee
Dear Customer,
This product is provided with a 3 year
guarantee from the date of purchase.
In case of defects, you have statutory
rights against the seller of the product.
These statutory rights are not restricted by
our guarantee presented below.
Terms of Guarantee
The guarantee period begins on the date
of purchase. Please retain the original re-
ceipt. This document is required as proof
of purchase.
Maintenance and
storage
If the safety goggles are scratched or
damaged, replace the entire item. We re-
commend storing these safety goggles in
an appropriate protective cover when not
in use.
Store in a dry and well-ventilated place
out of reach of sunlight, chemicals and
cleaning agents.
Disposal/
environmental
protection
The products and packaging should be
properly recycled.
If a material or manufacturing defect oc-
curs within three years of the date of pur-
chase of this product, we will repair or
replace – at our choice – the product
for you free of charge. This guarantee re-
quires the defective product and proof of
purchase to be presented within the three-
year period with a brief written description
of what constitutes the defect and when it
occurred.
If the defect is covered by our guaran-
tee, you will receive either the repaired
product or a new product. No new guar-
antee period begins on repair or replace-
ment of the product.
GB
MT
11