english
5. ASSEMBLY- / DISMANTLING INSTRUCTIONS
Cladding
The following cladding units can be removed for
easier transport:
1. Remove the front convection plate (Item 1).
2. Remove the two plate screws (Item 6).
3. Now remove the front cast cover (Item 2)
4. Remove the cover ceramic unit (Item 4 and 5).
5. Remove the complete left and right shells
(Items 7 and 8) by lifting them out of position.
6. In order to avoid damaging the ash collection
tray (Item 3), the two screws (Item 9) must be
removed from the pedestal skirt (Item 10) and
the ceramic unit is lifted toward the front.
The above components are re-assembled in the
reverse order.
Fig. 6: Cladding components
8
Irony M