Christopeit Sport BG2 Notice De Montage Et D'utilisation page 11

Assembly Instructions
Before beginning assembly, be sure to observe our
recommendations and safety instructions. Some parts are
pre assembled.
Step 1:
Place the seat on the floor and attach the main frame (2) onto the
padding (3) by using the screws M6x16 (17).
Step 2:
Place the foot (7) into the foot tube holder (1) and attach the
cross bar (4) at foot tube holder (1) in desired position and secure
with knurled grip nut (11). Slide a round padded section (10) and
a grip pad (18) on both ends of cross bar (4).
Step 3:
Place the main frame (2) into the holder of foot tube holder (1)
and screw them together by using screw M8x55 (13) washer (15)
and self locking nut (14). With safety pin (12) you have to secure
the bench fold up and assembled position.
(Attention: Please be careful, if you fold up the bench.)
Step 4:
Now attach the Round padded section locator (5) onto the foot
tube holder (1) and secure with knurled grip nut (11). Slide a
Round padded section (10) on both ends of Round padded
section locator (5).
- 11 -