Télécharger Imprimer la page

Haier HFE 172 NF Manuel D'utilisation page 17

Publicité

• Check the door seal for any kinks, debris or damage. If you notice any, and are unable to resolve
the issue yourself, contact Customer Care so that the seal can be replaced.
• This can be due to the decor door(s) not being properly fitted. If you are at all unsure, ask your
fitter to check the decor doors.
If excessive ice has formed in the freezer:
• It is normal for some ice to form in the freezer. This does not constitute a fault with the appliance.
• Check that there is some resistance when opening the door of the appliance. If it opens at the
slightest touch it may mean that the door seal needs to be replaced.
• Check the door seal for any kinks, debris or damage. If you notice any, and are unable to resolve
the issue yourself, contact Customer Care so that the seal can be replaced.
• This can be due to the decor door(s) not being properly fitted. If you are at all unsure, ask your
fitter to check the decor doors.
Technical assistance
To contact the technical assistance, visit our website:
https://corporate.haier-europe.com/en/
Under the section "website", choose the brand of your product and your country. You will be
redirected to the specific website where you can find the telephone number and form to contact
the technical assistance
Installation
This appliance must never be installed close to heat sources, e.g. heating elements or cookers,
nor in damp places.
Seek the help of another individual, or two, when installing this appliance. This appliance may
have sharp edges. Wear adequate PPE for the task and environment.
• To ensure the appliance is level, you should use the height
adjustable feet at the front of the appliance.
• The cooling system at the rear of the appliance must not touch the
rear wall. The greater the gap, the better.
• The appliance must be installed with adequate ventilation. Ensure
that there
is clearance above the appliance to allow air to escape and that there
is space between the rear of the appliance and the wall.
Install the appliance at a location where the ambient temperature
corresponds to the climate class indicated on the rating plate of the
appliance:
- Extended temperate (SN): 'this refrigerating appliance is intended to
be used at ambient temperatures ranging from 10 °C to 32 °C'
- Temperate (N): 'this refrigerating appliance is intended to be used at
ambient temperatures ranging from 16 °C to 32 °C'
- Subtropical (ST): 'this refrigerating appliance is intended to be used
at ambient temperatures ranging from 16 °C to 38 °C'
15

Publicité

loading

Ce manuel est également adapté pour:

Bi sd 177