Publicité
Les langues disponibles
Les langues disponibles
Getting started
- If the Landroid Vision has access to the recharging base. (See Fig. 35)
NOTE:
to activate the "Border Cut", option, the Landroid Vision must be positioned in the recharging base.
A. Position the Landroid Vision at the recharging base.
B. Go to the main menu.
C. Quickly press the
button three times.
D. Rotate
clockwise, select "Charging base - Yes / No", then press
E. The selected word will flash. Select "Yes" and press
F. Rotate
to select "Enable Border Cut - Yes / No", select the desired option and confirm.
G. Follow the same procedure to select the "Working Time".
H. Rotate
clockwise to choose whether or not to activate "Start" and press
Landroid Vision will return to the base to recharge and, if necessary, restart in accordance with the newly set working time.
- If the Landroid Vision does NOT have access to the charging base. (See Fig. 36)
NOTE:
the option "Border Cut" is not available for areas without access to the charging base.
A. Go to the main menu.
B. Quickly press the
button three times.
C. Rotate
clockwise, select "Charging base - Yes / No", then press
D. The selected word will flash. Select "No" and press
E. Follow the same procedure to select the "Working Time".
F. Rotate
clockwise to choose whether or not to activate "Start" and press
run out, the Landroid Vision will shut down on the spot.
5. Auto-Lock (See Fig. 37)
Auto-lock prevents accidentally messing up with Landroid Vision's settings, especially in situations where children or bystanders
could have access to the machine.
Auto-lock blocks the functionality of Landroid Vision's keyboard and menu. Once this functions is active, you will have to input the
PIN code before being able to access the menu with the settings.
In case any button is pressed while Landroid Vision is mowing, it will stop. To resume mowing and to access the menu, the PIN
code will have to be entered.
Please be aware that Auto-lock will not affect Landroid Vision's regular work sessions – unless, of course, someone tampers with
the keyboard.
A. Return to main interface.
B. Clockwise rotate
to "Security" and short press
C. Clockwise rotate
to "Auto-Lock" and short press
D. At this moment, people will see the black shading under the lock-time number. Short press
disappear. Then, clockwise rotate
selected, the display will be locked in 30 seconds.). Each rotate will add 30 seconds. After set, short press
E. Next, return to main interface and short press "Start" then
F. To change the Auto-lock setting, push any button on the keyboard. If Landroid Vision is moving, it will stop. Enter the PIN code
to unlock the keyboard and change the settings.
26
to confirm.
to confirm.
to enter.
to enter.
to adjust the lock time from 30 seconds to 10 minutes (For example, if 30 seconds are
, mower will start or continue to work.
to enter settings.
to confirm. Once the battery has run out, the
to enter settings.
to confirm. Once the battery or working time has
, the black shading will
EN
.
Publicité
