Publicité
Les langues disponibles
Les langues disponibles
Getting started
MACHINE SETTING
Advanced functions via the built-in interface
Despite its minimalistic design, you can set several advanced functions through the built-in control panel.
However, for the best user experience, we recommend you to use the free Landroid Vision App to do this, given its much richer
and intuitive interface.
General settings
Navigation
Page *
App link
Security
* Be continuously updated according to the software version.
** For after-sales service only
1. Settings (See Fig. 32)
A. To access the main menu, rotate
B. Rotate
to select the menu items: "General settings"
C. Use the same procedure for the following actions.
2. Set date & time (See Fig. 33)
A. Return to "General settings".
B. Rotate
clockwise to select "Set date & time", then press
C. Rotate
clockwise to select the date, then press
D. Rotate
to select the day, month or year and press quickly to confirm. Use the same method to complete the "Year / Month /
Time".
3. Adjust the blade height (See Fig. 34)
A. Back to home page, clockwise rotate
B. Clockwise rotate
to select Blade height adjustment, press
C. Press
button, the cutting height can be adjusted between 1.57-3.54 in. (40-90mm) (0.2 in./5mm every turn
rotate
to select the cutting height you prefer, and then press
4. One time schedule
To cut the lawn on a day or at a time outside the programming period, simply start the Landroid Vision by pressing the button
and then the button
to confirm. However, in this case the Landroid Vision will only cut the lawn for the duration of the battery
life and once back at the base for charging it will stay there until it is programmed to start again.
However the new "One time schedule" function allows a precise working time to be programmed with a border cut option.
It is also possible to decide whether at the end of the cutting session the Landroid Vision should return to the charging base or
switch off on the spot. This is very useful in any situation where an area of the lawn is not connected by a path that the Landroid
Vision can travel over to the main lawn (where the recharging base is located), i.e. those areas where the Landroid Vision needs to
be transported by hand, preventing it from continuing to operate until it runs out of battery.
Language
Time format
Date format
Set date & time
Rain start delay
Blade height adjust
Diagnose**
Change PIN code
Auto-Lock
clockwise.
, "App link"
to enter.
to confirm. The selected options (day, month or year) will start flashing.
to select General settings and press
to confirm.
to confirm.
, "Security"
, then press
to confirm.
EN
to enter.
). Clockwise
25
Publicité
