Installation; Circuit Diagram - BMW 3 Série Instructions De Montage

Specialist knowledge required.
1 Important information
(Only for use within the BMW dealer organisation).
Installation time approx. 3 hours.
The installation time may vary depending on the condition of the car and the equipment in it.
All work is to be completed using the latest BMW
- Repair instructions,
- Circuit diagrams,
- Service manuals,
- Work instructions,
- Diagnostics manuals
in a rational sequence using the prescribed tools (special tools) and pursuant to the relevant health and
safety regulations.
Safety notes
Please read the following before starting the installation work:
If the specified PIN slots are already in use, bridges, double crimps or parallel end stops are to be used. All work is
shown for a left-hand drive model. On right-hand drive models some of the work must be completed the opposite
way round.
The installation kit does not contain any colour-dependent parts.
All wiring harnesses are to be laid such that they cannot be crushed or damaged and that they do not
obstruct the freedom of movement of other car components.
This system is not coding-relevant.
1-2/EN