6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION! Water and salt can
come out of the salt container
when you fill it. After you fill the
salt container, immediately
start a programme to prevent
corrosion.
How to fill the rinse aid
dispenser
B
DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start a programme suitable for
the type of load and the degree of soil.
1. Press the release element (A) to open
2. Pour the rinse aid in the dispenser (C)
3. Remove the spilled rinse aid with an
4. Close the lid. Make sure that the lid
C
A
Using the detergent
CAUTION! The compartment
(C) is for rinse aid only. Do not
fill it with detergent.
CAUTION! Only use rinse aid
designed specifically for
dishwashers.
the lid (B).
until the liquid reaches the marking
"FILL".
absorbent cloth to prevent excessive
foam formation.
locks into position.
A
C
13
B