Panasonic KX-TGA680C Manuel D'installation page 3

R Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit's operating
instructions.
R Wipe the battery ends (
R Avoid touching the battery ends (
R Confirm correct polarities (
R USE ONLY Ni-MH batteries AAA (R03) size.
R Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Charge for about 7 hours.
R When the batteries are fully charged, "Fully charged" is displayed.
Note:
R When the language selection is displayed after installing the batteries for the first
time, you can select your desired language.
MbN: Select the desired setting. a MSAVEN a MOFFN
R If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
charge again.
Registering a handset to a base unit
1
Base unit:
Press and hold MLOCATORN for about 5 seconds.
R Depending on the base unit, a registration tone sounds.
R If all registered handsets start ringing, press MLOCATORN again to stop,
TGA680C(en)_1122_ver002.pdf
,
,
then repeat this step.
3
) with a dry cloth.
, ) or the unit contacts.
, ).
Rechargeable
Ni-MH ONLY
) and the charge contacts with a dry cloth and
Installation
Confirm
"Charging"
is displayed.
3
2012/11/22 14:26:23