Proline GS200S Manuel D'utilisation page 18

Before any maintenance or cleaning, disconnect the oven from the mains
supply and wait for it to cool to room temperature
Oven Door
Remove any food deposits and grease between the door seal and oven
cavity using a damp cloth, it is important to keep this area clean at all times.
Interior walls
Remove any grease splashes from the oven cavity walls with soap and
water, then rinse and dry.
The door seal and oven cavity have to be particularly well cleaned to
ensure the door will close properly and to avoid sparking between the
oven cavity and door assembly.
Do not use abrasive products such as scouring pads which will damage
the surfaces of the oven cavity and door.
Only warm soapy water must be used to clean stainless steel surfaces.
Roller rest
The roller rest should be removed and cleaned in hot soapy water
at least once a week to prevent grease restricting the rotation
of the wheels. The well in which the roller runs should be cleaned as well.
Outer surfaces
To clean the outside surface, use a damp cloth.
Avoid using abrasive products such as scouring pads that may damage
the cosmetic surfaces. Make sure water does not seep into the ventilation slots.
CAUTION
Some waveguide covers can be easily damaged take care when cleaning.
Accessories should be washed in warm soapy water by hand.
Do not wash accessories in a dishwasher.
WARNINGS:
If the inside of the oven cavity and door seal are not kept scrupulously c
lean there is a danger of damage due to sparking inside the oven cavity
invalidating the warranty.
Never scrape the oven cavity walls with sharp objects.
Never immerse the appliance, its cord or plug in water or any other liquid.
Never clean this product with a steam cleaner.
GB
17