DURAVIT SensoWash 254459 Notice De Montage page 9

6. Installation instructions
1
Inspection
> Inspect the product for damages.
7
Installing sound insulation (optional)
> Take z into account in the clearance between the
wall and bolt: Clearance = z+y+22 (⅞").
> Screw the bolt onto the hanger bolt until you
achieve the calculated clearance to the wall.
> Install the sound insulation set.
+
10 11
Connecting the water
NOTICE
Malfunctions caused by deficient hoses.
> Only use the water supply hoses provided
with the product.
12
Flushing the pipes
NOTICE
Malfunctions caused by dirty pipes.
> Flush the pipes according to the local standards
and collect the water.
22
Do not bend or kink hose
> Ensure that the hose is not bent or kinked.
25
Connecting the cable
WARNING
Contact with electricity can lead to a fatal electric
shock.
> Read and observe the information given in the
safety chapter of this manual.
> Remove the insulation from the wires
approximately 10 mm (⅜").
> Connect the 3 wires to the terminal block.
Observe the L, N and PE conductors.
> Ensure that the grounding wire is 10 mm (⅜")
longer than the L and N wire.
27
Installing the junction box
> Fix the junction box in the designated place inside
the ceramic.
30
Mounting the shower toilet unit
See seperate manual.
53978_WWC.indb 9 53978_WWC.indb 9
9
53978_MI_SensoWash_WWC
21.09.2022 14:17:40 21.09.2022 14:17:40