HQ Power VDPDP134D Notice D'emploi page 7

CURVE
V. 03 – 22/09/2014
VDPDP134D
4. In all mode, press the UP/DOWN button to select the preheat value of all
channels between 000%-050%.
5. In single mode, press the MENU button to select between channel and
preheat value.
6. When the channel is activated, press the UP/DOWN button to select from
[1-6], when preheat is activated, press the UP/DOWN button to select
from [000%-050%].
7. Press the ESC button to exit.
1. Press the UP/DOWN button to scroll to the curve menu.
2. Press MENU to enter the submenu system.
3. Press the UP/DOWN button to select from linear / switch / square.
7 ©Velleman nv