HQ Power VDPDP134D Notice D'emploi page 5

PHASE CORRECTION
DMX ADDRESS
3. Press the UP/DOWN-button to scroll to block/single menu, and tap menu to enter the block/single.
V. 03 – 22/09/2014
VDPDP134D
4. If you select Prog. 1-12, press the ESC button, the speed menu is
activated. You can select the chasing speed from 0.1 to 20 seconds using
the UP/DOWN button. After you've finished your setting, press ESC to
exit.
1. Press UP/DOWN to scroll to the phase correction menu.
2. Press the menu button to enter the sub menu system. You can use the
UP/DOWN button to select YES/NO.
[YES]: Linear dimming is activated
o
[NO]: Non-linear dimming is activated.
o
3. Press ESC to exit.
1. Press the UP/DOWN button to scroll to the DMX address menu.
2. Press the menu button to enter the submenu system. You can use the
UP/DOWN buttons to select block/single.
[Block]: The complete dimmer (all 6 channels) has only one start
o
address.
[Single]: The DMX address of each channel is selectable, several
o
channels can select the same DMX addresses.
+
5 ©Velleman nv