HQ Power VDPDP134D Notice D'emploi page 3

4. Description
4.1 Front view
1 2 x 8 LC Display
2 6 Channel LEDs
3 DMX LED
4 6 Channel buttons
5 Menu button
6 Up button
7 Down button
8 ESC button
9 6 x Circuit breaker (10A)
4.2 Rear view
1 Power input
2 Schuko socket
3 DMX output
4 DMX input
5 Analogue input
5. Connection Scheme
6. Controls and Functions
6.1 START MENU
V. 03 – 22/09/2014
VDPDP134D
Shows the current activities or menu adjustments.
These LEDs show the activities of the corresponding channels.
This LED blinks when a DMX signal is present.
These channel buttons are used to change the intensity of the
corresponding channel.
Press this button to scroll through menus or to increase values.
Press this button to scroll to menus or to decrease values.
Press this button to go back to the last menu level or to leave the menu
system.
In the initial menu, this button is used to reverse the change direction of
the channel setting.
Single-phase input or three-phase output.
This connector sends a DMX signal to the next DMX device.
This connector accepts DMX input signals.
DC 0-10V pulse signal
Apply power to the unit, the display will show the software revision, then the
start menu will be displayed. It consists of a row of dynamic images and
characters, the first row represents the intensity value, the second row
indicates the channel.
3 ©Velleman nv