DIPRA SPIDO GC-800P-20H Mode D'emploi D'origine page 15

FEATURES / DETAILS
Not included in the scope of delivery :
Suction line
1
Suction filter
2
Non-return valve (x2)
3A 3B
Pressure line
4
-
5
Suction port
6
Pressure port
7
Filling opening for water
8
Drain screw for water
9
Pump housing
10
Terminal box
11
Power switch
12
Armoured hose
13
Pressure switch
14
Pressure gauge
15
Pressure tank
16
Tank valve with protective cap
17
HMT : Max. delivery height.
HA : Suction head (between the surface of water and the pump)
HI : Difference between surface of the liquid to be pumped and
entrance of the suction line (min 0.3m)
Please read through these operating instructions
carefully to make sure that you can fully benefit from
all features.
TABLE OF CONTENTS
1. General safety information
2. Technical Data
3. Range of use
4. Scope of delivery
5. Installation
6. Electrical connection
7. Putting into operation
8. Setting the pressure switch
9. Operating the pump with a SPIDO prefilter
10. Maintenance and troubleshooting
11. Warranty - Service
GB