Publicité
Les langues disponibles
Les langues disponibles
Element
Function
Page
[20]
PLAY
Reproduces the tape, Is used
in
conjunction
with
the REC
[22]
key for
activating the record mode,
9
[21 )
STOP
Pressing of this key stops all tape transport functions and all selected
modes except dump edit mode.
9
[22]
REC
To be pressed together wilh PLAY
[20)
for enabling the record mode
,
Recordings can only be made on channels switched to READY.
9
[23]
VU-meter for indicating the level of channel 1 (left) with three peak level
LEDs for
+
6.
+9. and
+12dB,
6
[24)
READY
Readies channel 1 (left) for recording
,
The red LED above the key
flas-
hes,
During a
recording.
L e. after REC [22] and PLAY
[20]
have been
pressed. this LED is continuously
lit
12
[25]
INPUT
Output selector. The input signal is indicated on the VU-meter
[23]
and
can
be heard via the monitor
outputs,
11
l26]
SYNC
Output selector. The recording is reprod uced via the record head with
degraded frequency response
.
Permits recording of channel
2
in syn-
chronism with an existing recording on channell
6
(27)
REPRO
Output selector, The recording is reproduced via the reproduce sound-
\lead,
This function can also be activated while a recording is in pro-
gress so that the quality of a recording can be continually checked
(tape/source monitoring), The signal from the reproduce head is also
available on the VU-meter
[23]
and the monitor outputs,
10
,28]
INPUT CHl
Input level control for channell, In the UNCAL
[30
1
position it influences
the recording level of channell.
11
[29J
MIC
Input selector Activates the record mode via microphone (both chan-
nels), Thi s tu nction ca n only be se lected if the ta pe reco rd e r is equ ipped
with the optional MIC/LiNE SWITCH BOARD.
11
[30]
UNCAL
Activates the uncalibrated record mode.
The
record level can be adju
-
sted via the INPUT CH 1
[28]
and INPUT CH 2
[37]
level
potentiometers.
This
m
ode is automatically activated by the input selector [29].
10
(31]
LIN
E
Input selector. Activates the recording path via the LINE INPUT CH 1 and
LINE INPUT CH 2, Recording with calibrated or uncalibrated
(UNCAL
(30])
leve
l
is possible in this mode
.
10
[32]
VU-meter for indicating the level 01 channel 2 (right) with three peak
level LEDs for
+
6.
+
9. and
+
12
dB.
(33]
READY
Readies channel 2 (right) for
recording,
The red LED above the key
flashes. During a recording. i.
8,
after REC
(22]
and PLAY
[20:
have been
pressed. this LED is continuously lit.
12
(34]
INPUT
Input
selector,
The input signal is indicated on the VU -metcr [32J and
can
be heard via the monitor outputs.
11
[35]
SYNC
Output selector The recording is reprod
uc
ed via the record head With
degraded frequency response
,
Permits recording of channel 1
iI'
syn-
chronism with an existing
record ing
on channel
2,
6
/1(\
Publicité
