Publicité
STEP 3 - CONNECTING THE IOTW GATEWAY TO THE CORTEX ACCOUNT
1. Tap the Set up my network tab at the bottom of the main page. The gateway lamp blinks 1 time/second which means it is in platform account connection standby mode.
2. In the Set up my network page and the Claim my gateway window, enter the gateway name exactly as it is printed on the label, which is located on the right interior wall
of the refrigerator (see page 1)
Ensure that you enter the " _ " correctly.
3. Click the Connect tab.
4. Successful registration appears at the bottom of the app and the device appears in the gateway list. An incorrect registration of details results in the message Gateway
not found. Please ensure that the gateway name has been registered correctly as even a space at the end can prevent the connection.
5. At the top of the page, click Back to main to return to the main dashboard.
By following these steps, it is possible to link as many gateways as you like to an account. In the end, they will appear in the gateway list.
3. MONITORED REFRIGERATOR
Having successfully linked the Wi-Fi to the IoTW gateway, you can return to the main dashboard. The refrigerator that has been connected to the gateway should
automatically appear. If it does not appear, unplug and re-plug the refrigerator and wait for it to appear automatically. By clicking the refrigerator tab, you will be taken to the
refrigerator's dashboard for full control and logging. Temperatures are automatically renewed every few seconds, while logging can be changed in the gateway settings, refer
to paragraph
Log
settings.
Computer image
3
Publicité
