IoTW Wi-Fi GATEWAY
ATTENTION
Before using this device, please read these instructions carefully and keep them for future reference. Only use the device as described in this document. Should
internet or router connection be lost, logging stops.
CONTENTS
1.
Description
2.
Connecting the refrigerator to the Cortex IoT cloud platform
Step 1 - Account creation in the Cortex platform
Step 2 - Connecting the IoTW gateway to Wi-Fi – Provisioning
Step 3 - Connecting the IoTW gateway to the Cortex account
3.
Monitored refrigerator
4.
Log settings
5.
Signal range
6.
Alarm notifications
7.
Remote restarting of gateway
8.
Removal of existing Wi-Fi network from gateway
9.
Alternative Wi-Fi connection
1. DESCRIPTION
IoTW is a Wi-Fi gateway which allows the refrigerator and the Cortex IoT cloud platform to communicate via the Internet. The user accesses the platform either via a mobile
phone app or via a browser on a computer. The Cortex platform aims to fully monitor and control the refrigerator, and to send emails and notifications to the mobile phone
upon activation and deactivation of an alarm. Connection is achieved via the Wi-Fi router in the area of the refrigerator. The IoTW has a multifunction button and a red
indication lamp.
In the case of under-bench refrigerators, the IoTW is installed in the front vent, behind the protective cover, whereas in cooling chambers it is installed on the exterior ceiling
of the refrigerator, beneath the protective cover.
The gateway details – necessary for steps 2 and 3 below – are on the gateway label, which can be found on the right interior wall of the refrigerator.
Lamp
Gateway indications
In
Wi-Fi connection standby
2 times/sec
mode
1 time/sec
In platform account connection
(quick)
standby mode
1 times/sec
Restarts every time it lights up
(prolonged)
Blinks
Sending data to the cloud
Steady on
No router connection
1