Publicité
Les langues disponibles
Les langues disponibles
☑ Make sure the inside of the cooler is clean and that the water reservoir is free of dirt and debris.
☑ Place the cooler on level ground.
☑ Position the cooler so that obstacles such as racks and workbenches do not interfere with airflow.
☑ Provide uninterrupted fresh air intake and maintain a minimum clearance of 3 ft (0.9 m) behind the cooler.
☑ Provide adequate ventilation. Do not operate the cooler in an enclosed space.
☑ Make sure discharged cool air will be free of obstructions.
☑ Make sure the water supply pressure does not exceed 60 PSI (4 bar/414 kPa).
☑ Make sure the cooler will be plugged into a fused or breaker-protected circuit. Refer to the tables below for
electrical requirements. Do not plug Cool-Space
☑ If using an extension cord, use a 12 gauge cord if the cord is shorter than 50 ft (15 m) or a 10 gauge cord if
the cord is longer than 50 ft (15 m). Refer to the tables below for details.
Electrical Requirements
Model
Cool-Space
500
®
Three-Conductor Heavy Duty Extension Cord Requirements (120 V)
Cord Length
0–50 ft (0–15 m)
50–100 ft (15–30 m)
Three-Conductor Heavy Duty Extension Cord Requirements (220/230 V)
Cord Length
6 m
16 m
32 m
BEFORE YOU START
Volts +/- 10%
120 V
220/230 V
16 GA
13 A
10 A
1.5 mm
2
13 A
13 A
10 A
WWW.BIGASSFANS.COM
© 2023 DELTA T LLC
500 into a GFCI outlet.
®
Frequency
Min. Circuit Size
60 Hz
50/60 Hz
Cord Size
14 GA
18 A
13 A
Cord Size
2.5 mm
2
15 A
14 A
12 A
ALL RIGHTS RESERVED.
Running Amps
25 A
15 A
12 GA
25 A
18 A
4 mm
2
15 A
15 A
13 A
16.5 A
8.6 A
10 GA
30 A
25 A
5 mm
2
15 A
15 A
15 A
1
Publicité
