Publicité
8
EN
TECHNICAL SAFETY
Installation of this appliance must be
performed only by a licensed spe-
cialist.
Check the appliance for visible signs
of damage before using it. If the ap-
pliance has been damaged in
transport, do not connect it. Never
use a damaged appliance! It could
be dangerous!
Repairs should be performed by a li-
censed technician only. Improper re-
pair may result in considerable dan-
ger to you and others. If your
appliance needs repair, contact a
Service Centre or your dealer.
If the supply cord is damaged, it
must be replaced by the manufac-
turer, its service agent or similarly
qualified persons in order to avoid a
hazard.
Electrical leads and cables must not
be touching the appliance.
The appliance should be connected
to the mains power supply by means
of an approved circuit breaker or
fuse. Never use multiple plug adapt-
ers or extension leads to connect
appliance to the mains electricity
supply.
The power supply of the appliance
should be turned off before repair or
clean.
This appliance must not be used in
a non-stationary location (for exam-
ple on a ship).
To avoid the possi-
Attention!
bility of electric shock, the ap-
pliance should be powered
down before replacing the
lamp.
Publicité
