Publicité
Les langues disponibles
Les langues disponibles
How to Install Gas cooktop:
Once the gas line is in place and the cabinet has been prepared in
accordance to the dimensions previously provided:
1.Remove packing material, tape and any temporary labels from your
cooktop. (Fig. 1)
Fig. 1
2. Push back the top glass cover assembly a little and lift up to
remove it from the cooktop. (Fig. 2)
Fig. 2
3. Slide the cooktop into the cabinet opening. Verify the cooktop is
level from side to side and front to rear. (Fig. 3)
Fig. 3
4. Connect a gas supply line with a shut-off valve and 3/8" female
flare compression connection to the cooktop through gas cavity on
the upper Left-rear corner of the cabinet with 2 wrenches. Connect
a 12V power supply wire to the appliance from the upper right-rear
corner of the cabinet. (Fig. 4)
Rev.04.12.24
Fig. 4
11
CCD-0008339
Publicité
