Wellell Domus 2+ Mode D'emploi page 10

Domus 2+ / English
3. Installation
Pump & Mattress Installation
3.1.
Several installation tips are listed below:
Warning:
cord, if any, should be neatly arranged to avoid any tripping ac-
cidents. The EQUIPMENT should be firmly placed at position
where users/doctors can easily access.
(1) Place the mattress on top of the bed
frame. Fasten the Nylon Straps to
secure the mattress to bed frame if
available.
(2) Clip the plastic hanger on the back of
pump in a bottom-to-top direction and
hang the pump onto bed rail (foot-end)
or place the pump on a flat surface.
(3) Connect quick connector from air
mattress to the pump unit. When a
"click" is felt or heard, the connection is
completed and secured.
After installation, the extra length of the power
Warning: The
mattress must be applied
on the underlying mat-
tress
NOTE: Check and ensure
the air hoses are not
kinked or tucked under
mattress.
7
overlay