Publicité
Les langues disponibles
Les langues disponibles
6. Take off the rubber plug. Connect the water pipe part to main valve on the compressor cover with
connector, and remember to insert the anti-slip clips, then connect the end of the water pipe with
the nut to the water source.
Take off the rubber plug.
Caution!
• The external water source must be clean, and the water pressure should be 1.5~7 bar to guarantee
proper working.
• Check the water pipe connection, check whether there are any other things inside the ice maker and
ice bucket.
• After accessing the water source, open the faucet and check whether there is leakage between the
faucet and the connecting pipe. If there is leakage, check the connection of the pipe.
• Select the water function, use a large cup to press the dispenser, keep the water exhausting for 5
minutes until the water is clean and smooth, during the process the water taken out is not drinkable.
• Select the function of dispensing ice, use a large cup to press the dispenser, and check the normal
operation of the internal motor through the sound judgment.
• Wait for 3 minutes and check whether the water inlet valve of the refrigerator freezer, the water pipe
connectors and water filter are leaking or not.
AMBIENT TEMPERATUE
This appliance is designed to operate in ambient temperature between 10°C and 38°C. If these
temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly. If the ambient
temperatures are exceeded for long periods, the temperature in the freezer compartment will rise above
-18°C and food spoilage may occur.
Connect the water pipe with
connector and remember to
insert anti-slip clips on both
sides of connector.
EN-13
Water source
Water pipe
Connect the
end of the
water pipe
with the nut to
the water
source.
Publicité
