Publicité
Les langues disponibles
Les langues disponibles
Connections
Wireless Network
You can connect to network with a Wireless IP sharer.
1.
A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the top panel of the product.
2.
Set the network options. (See pages 37~41)
Wireless LAN Adapter
NOTE
✎
Use only the Samsung wireless LAN adapter with this product. (Model name: WIS09ABGN).
▪
Do not use this adapter with any other third-party products.
Please contact the retailer of this product for purchasing the wireless LAN adapter.
▪
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the
wireless network.)
▪
Wireless LAN, by its nature, may cause interference, depending on the use condition.
(AP performance, distance, obstacles, interference by other radio devices, etc).
▪
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
▪
When applying the security key for the AP (wireless IP sharer), only the following is supported.
1)
Authentication Mode : WEP, WPAPSK, WPA2PSK
2)
Encryption Type : WEP, AES
▪
For the AllShare function, a PC must be connected in the network as shown in the figure.
The connection can be wired or wireless.
English
Wireless IP sharer
Networking with PC
for AllShare function
(See pages 56~57)
Broadband
service
Publicité
