Publicité
Les langues disponibles
Les langues disponibles
Setup
NOTE
✎
▪
This function is not available if the HDMI cable does
not support CEC.
▪
If your Samsung TV has an n logo, then it
supports the Anynet+ function.
▪
Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
BD Data Management
Lets you manage the downloaded contents from
a Blu-ray Disc that supports the BD-LIVE service.
You can check the device information including
the storage size, delete the BD data or change the
Flash memory device.
Change Device allows you to select either the
product's Internal Memory or External Memory
(connected USB Device).
If the data to be stored from BD-LIVE is greater
than the size of the remaining memory or the
Internal Memory is full, connect an External USB
device, and then select External Device in the
menu.
Settings
Display
BD Data Management
Audio
Current Device
System
Total Size
Network
Available Size
Language
Delete BD Data
Security
Change Device
General
Support
Description of Device(Storage) Information on
the Product
Total Size : Total size of the Device (Storage).
•
Available Size : Available size of the Device
•
(Storage).
NOTE
✎
▪
In the external memory mode, disc playback will
be stopped if you disconnect the USB device in the
middle of the playback.
English
: Internal Memory
: 589MB
: 588MB
\
: Internal Memory
" Select
' Return
▪
Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported. We
recommend you use USB devices that support the
USB 2.0 protocol with 4 MB/sec or faster read/write
speed.
▪
The Resume Play function may not work after
formatting the storage device.
▪
The total size of BD Data Management may differ,
depending on the conditions.
Clock
Set time-related functions.
Settings
Display
Audio
Clock Mode
System
Clock Set
Network
Time Zone
Language
DST
Security
General
Support
> Move
Clock Mode : You can set it to Auto or
•
Manual.
If you select Manual, the Clock Set menu will
be activated and DST will be deactivated.
Clock Set : You can specify the current time
•
and date manually.
Time Zone : You can specify the time zone that
•
is applicable to your area.
DST : You can set DST (Daylight Saving Time)
•
on or off.
Clock
: Auto
\
: GMT + 0:00
: Off
" Enter
' Return
Publicité
