Simons Voss Technologies SH AX Guide Abrégé page 21

21 / 72 | EN
sioning instructions. Pass these instructions and any main-
tenance instructions to the user.
2. Information for SmartIntego users
SimonsVoss recommends the following approach:
1. Remove the existing LockNode.
2. Install the new LockNode.
3. Open SmartIntego Manager.
4. Select "Replace with chip ID".
5. Enter the new chip ID.
6. Carry out programming on the SmartIntego tool.
7. Import into the integrator system if necessary.
8. Update the documentation (installation plan).
Do not use the old LockNode anymore.
3. Fitting the LockNode
Special tool at hand.
ü
1. Insert the special tool into the fitting's cover inlay.
1
2. Slide the cover downwards and remove it completely.
3. Insert the LockNode circuit board into the slot provided.
SmartHandle AX will bleep and flash red four times.
9
2. Information for SmartIntego users