Publicité
•Each time the power turns on, the display panel will
light everything for 3seconds, and then enter the
normal display status.
•The display will activate the screen saver when the
door is closed for 60 seconds with the display on.
•Open door action will exit the screen saver.
•Any button touch or open door action will exit the
screen saver.
•Touch the key while the appliance is under screen
saver state would activate the screen only. It will not
change the settings.
•Each valid button press emits a short sound.
•The corresponding temperature setting is reflected
in the display, and the setting takes effect and is
stored after 10 seconds of operation without touch
the key.
Temperature Indicator
Temperature Measure Change (
You can change the temperature display setting from
Fahrenheit to Celsius degrees by touch the
" "key for 3 seconds, and vice versa.
Temperature regulation
You can set the temperature you desire by touch
the key "
or 1°F each time you touch the UP
key and will decrease 1°C or 1°F each time you
touch the DOWN key.
NOTE:
The temperature range is from 1°C（34°F）to 10°C(50°F).
When you set a temperature, you set an average
temperature for the whole cabinet. There may be a 2°
C ( 36°F)to 3°C ( 38°F)variance between the top and
bottom shelves of the appliance.
E
D
t
" or "
". The temperature will increase 1°C
H
G
F
F ℃
/
)
4
40°F).
8
Down
Publicité
