Télécharger Imprimer la page

LG LHTNS2403 Serie Manuel Du Propriétaire page 17

Publicité

Les langues disponibles

Les langues disponibles

Grasp the drawer handle and pull it forward to the drawer
stop. Lift up and pull out.
To replace the Pantry Drawer:
Slide the drawer back all the way past the drawer stop.
Ice Tray (On some models)
indicated in the picture. Do not
overfill with water or ice cubes
will be difficult to remove
freezer dial to 3.
Twist the ice tray to remove the
ice cubes
so may result in damage to the
tray.
pour water on the back of the
tray or soak it in water before
removing ice cubes.
HUMIDITY CONTROLLED CRISPERS
The crispers provide fresher tasting fruit and vegetables
by letting you easily control humidity inside the drawer.
You can control the amount of humidity in the
moisturesealed crispers by adjusting the control to any
setting between VEGETABLES and FRUIT.
VEGETABLES keeps moist air in the crisper for bes
storage of fresh, leafy vegetables.
FRUIT lets moist air out of the crisper for best storage
of fruit.
To remove and install the crisper drawers:
1. Pull the crisper drawer out to the drawer stop.
2. Lift the front of the crisper up, then pull it straight out.
3. To install, slightly tilt up
the front, insert the drawer
into the frame and push it
back into place, past the
drawer stop.
USING YOUR REFRIGERATOR
To remove the crisper glass:
1. Remove the
crisper drawers (as
described above).
2. Reach in under
the glass and lift up.
3. Gently push the
glass up and out.
To remove the crisper cover:
1. Remove both
crisper drawers.
2. Remove the
crisper glass.
3. While holding the
support and crisper
cover, pull upand
out.
DOOR BINS
The door bins are removable for easy cleaning and
adjustment.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin,
slide it in above the
desired supportand
push down until it
snaps into place.
NOTE: Some bins may vary in appearance and will
only fit in one location.
DAIRY BIN
1. To remove the Dairy Bin, simply lift up and pull out.
2. To replace the Dairy Bin, slide it in above the desired
support slots and push down until it stops.
16
Dairy Bin

Publicité

loading