Publicité
Les langues disponibles
Les langues disponibles
5 ASSEMBLY
5.1
8
Assembly
502532-01
502533-01
Preliminary work
–
Raise the motorcycle at the rear with lifting gear (see Owner's
Manual).
Assembly
–
2
Remove nut
with washer.
–
3
Take off chain adjuster
–
Hold the rear wheel and pull out wheel spindle
washer and chain adjuster
–
Secure the rear wheel in this position.
Info
The help of an assistant is useful in this step.
–
4
Mount wheel spindle
(included).
Info
Mount left and right chain adjusters
position.
–
2
Mount nut
with washer and chain adjuster
but do not tighten yet.
–
Ensure that the chain adjusters lie flat on the screws and tigh-
2
ten nut
.
Guideline
In order for the rear wheel to be correctly aligned, the mar-
kings on the left and right chain adjusters must be in the
same position relative to reference markings
Nut, rear wheel
spindle
Final steps
–
Check chain tension (see Owner's Manual).
–
Remove the motorcycle from the lifting gear at the rear (see
Owner's Manual).
.
4
with the
5
.
with washer and chain adjuster
1
in the same
1
(included),
A
.
M14x1.5
100 Nm
(73.8 lbf ft)
1
Publicité
