Publicité
Les langues disponibles
Les langues disponibles
Control Panel
Non-Steam Models (DLE3400*)
Power Button
a
Press the button to turn the dryer ON. Press
again to turn the dryer OFF.
NOTE
• Pressing the Power button during a
cycle will cancel that cycle and any load
settings will be lost.
Cycle Selector Knob
b
Turn this knob to select the desired cycle.
Once the desired cycle has been selected,
the standard presets will be shown in the
display. On Manual Dry cycles, these settings
can be adjusted using the cycle modifier
buttons anytime before starting the cycle.
Start/Pause Button
c
Press this button to start the selected cycle. If
the dryer is running, use this button to pause
the cycle without losing the current settings.
NOTE
• If you do not press the Start/Pause
button to resume a cycle within 60
minutes, the dryer turns off automatically
and all cycle settings are lost.
Cycle Modifier Buttons
d
Use these buttons to select the desired cycle
settings for the selected cycle. The current
settings are shown in the display. Press the
button for that option to view and select other
settings.
Cycle Option Buttons
e
Press each of these buttons to select
additional cycle options. Press and hold any
button marked with an asterisk for 3 seconds
to activate a special function.
More Time/Less Time Buttons
f
Use these buttons with the Time Dry and
other Manual Dry cycles to adjust the drying
time. Press the More Time button to increase
the selected manual cycle time by 1 minute;
press the Less Time button to decrease the
cycle time by 1 minute.
Time and Status Display
g
The display shows the settings, estimated
time remaining, options, and status
messages for the dryer.
OPERATION
29
Publicité
