Fujitsu AIRSTAGE ARXA24L Mode D'emploi page 4

MANUAL AUTO OPERATION
Use the MANUAL AUTO operation in the event the remote control unit is lost or otherwise unavailable.
*Limited to only when receiver unit is connected.
CAUTION!
Starting Operation
Press the MANUAL AUTO button on the operating control panel.
The operation can be set in the following setting.
Operating mode
Fan speed
Setting temperature
Stopping Operation
Press the MANUAL AUTO button on the operating control panel.
En-3
9373384038-02_OM_en.p65
Do not press the MANUAL AUTO button with wet hands or pointed objects, otherwise an electric
shock or malfunction may occur.
AUTO When Auto mode cannot be selected, it will operate in the same mode as the
other indoor unit in the same system. (When other indoor unit in the same sys-
tem doesn't operate, the air conditioner will operate in cooling.)
AUTO
23 °C
3 6/2/09, 10:36