Publicité
Les langues disponibles
Les langues disponibles
REVERSING THE DOOR (OPTIONAL)
B MODELS WITH FABRIC REFRESH
FEATURE (cont.)
11
Rotate the outer door 180°. Place hinges into
position, making sure you mount the hinges on
the side opposite the pocket. Mount the inner
door back into the outer door frame and secure
with screws removed in step 8. Screw the door
hinges in and insert the hinge caps.
Inside
screws
Outer door
12
Install the harness cover onto the front panel.
Installation Instructions
Plastic
Hinge
Caps
Hinge
screws
Inner door
Inside
screws
Harness
Cover
B MODELS WITH FABRIC REFRESH
FEATURE (cont.)
13
Mount the assembled door on the 2 upper left side
hinge screws installed in step 2. Move the hinge
screws loosened in step 2 into the lower left side
screw holes and firmly tighten all 4 screws.
Hinge
14
Install the 4 plastic caps removed in step 1 into the
4 right side front panel holes.
Right side of
front panel
NOTE: To return the door to the original setup, follow
these instructions, swapping "left" and "right".
When you finish
Plug the dryer back into
its electrical outlet.
22
Door
Plastic Cap (4)
Hang door and
tighten screws
Publicité
