KitchenAid 5KFP0919EAC Manuel D'utilisation Et D'entretien page 14

CARE AND CLEANING
3
The following parts are dishwasher-safe,
top rack only: Bowl, Stainless Steel Flat
Beater, Stainless Steel Spiral Dough Hook, and
Removable Pouring Chute
*Available with select models only and available as an accessory purchase.
TROUBLESHOOTING
Problem
If Stand Mixer warms up
during use:
The Stand Mixer emit a
pungent odour:
If the Stainless Steel Flat
Beater hits the Bowl:
If your Stand Mixer should fail
to operate, please check the
following:
If the problem cannot be
corrected:
W11457004A.indb 13 W11457004A.indb 13
4
The following part should be
hand-washed only using warm, soapy
water and drying thoroughly: 11-Wire
*
.
Stainless Steel Elliptical Whip
Under heavy loads with extended mixing time periods, you
may not be able to comfortably touch the top of the unit.
This is normal.
This is common with Electric Motors, especially when new.
Stop the Stand Mixer. See the "Beater to Bowl Clearance"
section and adjust the Beater to Bowl Clearance.
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working
order? If you have a circuit breaker box, be sure the circuit
is closed.
OFF (0)
Turn the Stand Mixer for 10-15 seconds, then turn
it back on. If the Stand Mixer still does not start, allow it to
cool for 30 minutes before turning it back on.
See the "Terms of KitchenAid Guarantee ("Guarantee")"
section.
Do not return the Stand Mixer to the retailer; retailers do
not provide service.
.
Solution
13
03-09-2020 11:42:33 03-09-2020 11:42:33